Version 1 (modified by emfox, 11 years ago) (diff)


First, I use debian lenny root from alex and kernel from sleepwalker on my Treo 680.

By default, treo680-pm module was enabled, so I just start (or enable?) the GSM module by this script:

lenny:~# cat echo 0 > /sys/devices/platform/treo680-pm/gsm_power_on echo 1 > /sys/devices/platform/treo680-pm/gsm_power_on echo 1 > /sys/devices/platform/treo680-pm/gsm_wake

We need minicom to do the work, if you have set the network, please:

apt-get install minicom

Open the minicom terminal:

minicom -s

Setting baudrate to 460800, the device to /dev/ttyS0 (or other, depend on 'dmesg|grep FFUART'), then open minicom without parament again, and use our needed AT commands:


You may want to enable the command echo by: ATE

On my Treo with a Chinaunicom SIM card, some '+CREG' and '+CGREG' displayed in a minute, then free to

Dial a number: ATD10010; no +8610010, and don't forget the ';' Answer a Call: ATA Hangup a Call: ATH

On my phone, it often hangs after typing wrong AT commands, or even after idling some minutes. That is, no output,even 'ERROR's, and of course command echo has been enabled. Maybe there's something more should be take cared.

The GSM 07.07 should be a good guide.